Casio E-CON Version 1.20 - Manual (Page 19)

u To recall a setup and use it for sampling
Be sure to perform the following steps before starting sampling with the EA-100.
1. Connect the calculator to the EA-100.
2. Turn on EA-100 power.
3. In accordance with the setup you plan to use, connect the proper sensor to the
appropriate EA-100 channel.
4. Prepare the item whose data is to be sampled.
• To recall a setup and use it for sampling
1. On the E-CON main menu, press 2(MEM) to display the setup memory list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press 1(START).
4. In response to the confirmation message that appears, press w.
• Pressing w sets up the EA-100 and then starts sampling.
• To clear the confirmation message without sampling, press i.
u To change the name of setup data
1. On the E-CON main menu, press 2(MEM) to display the setup memory list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press 3(REN).
• This displays the screen for inputting the setup name.
3-3
Setup Memory
4. Input up to 18 characters for the setup name, and then press w.
• This changes the setup name and returns to the setup memory list.
# See “Operations during a sampling operation”
on page 5-2 for information about operations
you can perform while a sampling operation is
in progress.