Elation Professional Design 60 Tri - Manual (Page 39)

Design LED 60 TriStrip™
©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com
15. LENS CHANGE
The Design LED 60 TriStrip comes with a removable front cover that allows the lenses to be
swapped to achieve different beam angles.
The lens cover is held in place by ¼ turn locking fasteners. To remove the cover; 1) Turn the
locking fasteners in a counter-clockwise direction. 2) Once the fasteners are loose lift the
cover to expose the lens assembly (see illustration below). 3) Remove or replace the filters
and reassemble.