Elation Professional Design 60 Tri - Manual (Page 10)

Design LED 60 TriStrip™
©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com
5. FIXTURE OVERVIEW
1. Bracket Locking Knob – This knob is used to secure the bracket in place after angle
adjustments have been made.
2. Fixture Chassis – Extruded aluminum slotted chassis, allows similar units to be
mounted together. See assembly instructions on page
3. Diffusing Lens/LED Assembly – This lens is used to both protect the LEDs as well as
diffuse the light output. Tri-Color LED assembly
4. Eye Bolt – This bolt is used a securing point for a safety cable.
5. On/Off Power Switch – Controls main power to the unit.
6. Power Input/Fuse Holder Assembly – This assembly holds the safety fuse as well as
provides a female IEC connector for a power cord. Always replace the fuse with an exact
match unless otherwise specified by an authorized Elation Service Technician. Using a
fuse other than that specified could seriously damage the unit and will void your
manufactures warranty.