Cleaning and maintenance – Elation Professional Design 60 Tri User Manual
Page 34

Design LED 60 TriStrip™
©Elation Professional, Los Angeles Ca.
33
www.ElationLighting.com
11. CLEANING AND MAINTENANCE
The consider the following point during normal service and inspection:
1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may
fall out during normal operation resulting in damage or injury as larger parts could fall.
2. Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never
use alcohol or solvents.
There are no user serviceable parts inside this, please refer all other service issues to an
authorized Elation service technician.
Should you decide to service the fixture yourself please order genuine Elation parts directly
from Elation.