Ò³ãæ 21, Chapter editing, Play mode – Curtis DVD2100 User Manual

Page 21

Introduction

For finalized discs, every title is made of only one chapter. There is no such function as selected chapter play or

random programmed play of disc segments for such discs. The index icon of each title is determined by the system.

As every title is made of only one chapter, it is inconvenient to browse the disc and satisfy your need for individualized

appreciation. The chapter editing function is to solve such defect.

Enter the Chapter Editing Mode

When the disc in the drive is DVD+RW and the system is in the DVD Monitoring mode, press the EDIT

button

to enter the Chapter Editing mode and the Chapter Editing control bar menu will appear.

Note

The Chapter Editing function is only available for DVD+RW discs.

If the DVD+RW disc is write-protected or the current mode does not allow the entrance of Chapter Editing mode,

the remedy for the former is to cancel the write protection with

disc operation, and in the latter case, just exit the mode.

Title

04/04

Chapter

01/01

Play

Chapter Marker

Hide Chapter

Index Picture

Split Title

T-Elapsed 0

Editing Mode

Title

Chapter

01/01

Play

Chapter Marker

Hide Chapter

Index Picture

Split Title

T-Elapsed 0

Menu Description

The chapter editing control bar menu is as shown in the

following chart and the meanings for each item are as

follows:

1. Title:. The left number under the icon is the current

titleto be edited; the right is the total number of the

titles in the disc.

2. Chapter. The left number is the current chapter; the

right is the total number of chapters in the title.

3. Play:. The function is the same as the Play Mode.

4. Chapter Mark:. Split or Combine Chapter function.

5. Hide Chapter:. Hide or Show Chapter function.

6. Index Picture: Change the index picture.

7. Split Title: Split the title in two.

8. T-Elapsed: Time Selection Play.

Operation Steps

Select the title to be edited

1. Enter the Editing Mode.

2. In the Editing Mode control bar menu, use the or

button to select the title.

Chapter Editing

Play Mode Control

There are four playing modes for the unit, including Normal Play, Repeat Play, Prog ram Play and Ran dom Play.

The operations are as follows.

Normal Play

1. Enter the control bar menu.

2. Press the , and

SELECT

buttons to select the first item in the control bar, Play Mode.

3. Press the or button to select the Normal Play value, and then press the

SELECT

button to enter the

Normal Play mode.

4. Pressing the

PLAY button directly is another way realizing Normal Play.

There are various Repeat Play modes, including Repeat Title (DVD only), Repeat Chapter (DVD only), Repeat

Disc (DVD/SVCD/VCD), A-B Repeat, etc.

1. In the play control bar menu, press the , and

SELECT

buttons to select the first item, Play Mode

Control.

2. Use or button to select a proper value, press the

SELECT

button and the system will play with the corre

sponding Repeat Play mode.

3. Pressing the

REPEAT

button directly is another way repeat play operation.

4. If the value selected is

A-B Repeat

, press the

SELECT

button and the system will prompt that Point A

is set, please set the next point. Press the

SELECT

button again to set the next point, i.e. Point B. After that,

the system will conduct a section repeat play, that is, repeat from A to B.

The values of Play Mode Control Item are as follows. The values may vary for different discs.

1. Normal Play. 4. Title Repeat 7. DIR Repeat

2. A-B Repeat 5. Disc Repeat 8. Program Repeat

3. Chapter Repeat 6. Track Repeat 9. Random Repeat

File Play

File Type: Audio

Mode: Program

Trick: Playing

Audio: Stereo

Time: 00:02:48-00:51:25

Repeat Play

Play Mode