Curtis DVD2100 - Manual (Page 11)

OPEN/CLOSE RECORD STANDBY/ON
DV INPUT USB
37
1
1
System Setup PLAYBACK
System Setup
PLAYBACK Settings
1. Enter the System Setup control menu.
2. Use the or button to select the PLAYBACK item.
3. Press the SELECT button to enter the Play Setting
mode. The following chart is the Play Setting main menu.
TV aspect ratio Pan Scan
Rating level Off
Digital Audio Output RAW
Analog Audio Output 5.1 CH
Note
This setup can be done only in the No Disc or stop mode .
TV aspect ratio Settings
1.In the Play Settings menu, press the SELECT button to select the TV aspect ratio item and drop down a
menu, as shown in the above chart.
2.Use the or button to select a proper setting value, and press the SELECT button to confirm.
The values to be selected in this setting are explained as follows.
16:9 is suitable for a wide screen TV.
Pan Scan is suitable for a TV with ordinary screen size. When a wide screen picture is played, the left and right
margin will be cut and the picture will occupy the entire screen.
Letter Box, use this for ordinary TV. When a wide screen picture is played, a black frame will appear at the top
and bottom of the TV screen.
The default value is Letter Box.
3.Press the RETURN button to return to the upper level menu and set up other items.
Note
The playing effect depends on the recorded picture size. Some picture might not be played according to the
screen format you select.
For those discs recorded as 4:3, no matter how the screen format is set, the screen format played is always 4:3.
The selection of screen format shall be in accordance with the TV screen.
Rating Level
With the setting of the authorization level and password of
the unit, some discs which contain restricted content are only
playable after the input of password. This function enables you
to restrict the unit to play some discs which are not suitable for
children.
1. In the Play Settings menu, use the or button to move the cursor, select the Rating Level item, and press
the SELECT button. Then the OSD displays:
2. Enter the password, and press the SELECT button. The TV screen will display the dialog box as shown in
the right chart.
The super password is 3308.
System Setup PLAYBACK
TV Screen Format Pan Scan
Parental Off
Digital Audio Output
Analog Audio Output
Onglnal Code Value
5.1 Channels
Enter the password:
10
A
P
P
5
M
How to install and use the remote controller
Notes:
Do not drop the remote controller or leave it in places of high humidity.
Do not leave the infrared ray receiver barely in sunlight or bright light.
Please change the batteries of low electricity in time. And do not mix new and old batteries together. Try not to
use rechargeable batteries.
PS/IS SCAN MUTE
SOURCE TV DV
PLAY
STOP PAUSE/STEP
ADD /CL EAR NAVIG ATION
SELECT
MENU ZOOM
FI N A LI ZE
REC/OTR
TIM ER
DISPLAY
REV
PREV
FWD
NEXT
GOTO
ED IT
DISC OPE R
Q UA LI TY
ERA SE
SUBTITLE ANGLE SETUP AUDIO
TITLE SLOW
RETURN PROG REPEAT RANDOM
0
//
1 2 3 4
5 6 7 8
9
OPEN/CLOSE STANDBY/ON
P P VOL
+
CHANNEL
****
Cancel OK