Enterasys Networks 6H2xx - Manual (Page 360)

Built-in Commands
12-26 Network Tools Screens
show
Description: Displays information concerning various components of the device. Protocols
currently supported are IP, IPX, DECnet, and AppleTalk. Components of
those protocols that are currently supported are ARP caches, route tables, FIB
tables, server tables, and interface tables. The number of valid entries in the
table will be outputted at the end of the table display.
NOTE: The Network Tools connection to the device will be
terminated upon execution of this command.
Syntax:
show [TABLE]
Options: None
Example:
-> show Appletalk interfaces
# Interface AdminStatus OperStatus MTU Forwarding Framing
# 1 enabled enabled 1500 enabled ethernet
# 2 disabled disabled 1500 disabled ethernet
> show IP ARP
# Interface MediaType Physical|Address NetworkAddress
#3 3(dynamic) 00:00:1d:04:40:5d 123.456.40.1
#4 3(dynamic) 08:00:20:0e:d8:31 123.456.40.30
# Number of valid entries: 2