W# custom, Menu functions (custom menus) – Olympus PEN E-PL8 User Manual
Page 92
92 EN
Menu functions (Custom menus)
4
Option
Description
g
ISO-Auto Set
Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for ISO.
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
—
ISO-Auto
Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M. ISO sensitivity is fi xed at ISO200 in mode
M.
[All]: Auto ISO sensitivity selection is available in all modes.
—
Metering
Choose a metering mode according to the scene.
50
AEL Metering
Choose the metering method used for AE lock (P. 97).
[Auto]: Use the currently selected metering method.
—
Bulb/Time Timer
Choose the maximum exposure for bulb and time
photography.
—
Bulb/Time Monitor Set the monitor brightness when [BULB], [TIME], or [COMP]
is used.
—
Live Bulb
Choose the display interval during shooting. Some
restrictions apply. The frequency drops at high ISO
sensitivities. Choose [Off] to disable the display. Tap the
monitor or press the shutter button halfway to refresh the
display.
—
Live Time
—
Anti-Shockz
Choose the delay between the shutter button being pressed
and the shutter being released. This diminishes camera
shake caused by vibrations. This feature is useful in
situations such as microscope photography and
astrophotography.
Choose 0 seconds when you want to reduce slight blurring
due to shutter operation.
It is also useful for sequential shooting (P. 54) and self timer
photography (P. 54). However, sequential shooting is not
available when this setting is set to 0 seconds.
—
Composite
Settings
Set an exposure time to be the reference in composite
photography (P. 34).
—
W
# Custom
Option
Description
g
# X-Sync.
Choose the shutter speed used when the fl ash fi res.
106
# Slow Limit
Choose the slowest shutter speed available when a fl ash is
used.
106
w+F
When set to [On], the exposure compensation value is
added to the fl ash compensation value.
45, 60
MENU
c
W
V Exp/p/ISO
MENU
c
V