Olympus PEN E-PL8 - Manual (Page 89)

89 EN
Menu functions (Custom menus)
4
S Button/Dial
Option Description g
Button Function Choose the function assigned to the selected button.
98
[
FFunction], [UFunction], [RFunction], [IFunction],
[
GFunction], [nFunction], [ lFunction]
Dial Function You can change the function of the control dial (P).
P F / %
A
Aperture value / F
S
Shutter speed / F
M
Shutter speed / Aperture value
q
[Prev/Next] / [G / Magnify]
In P, A, S, and M modes, the roles played before and after
F button is pressed are reversed.
—
Dial Direction Choose the direction in which the dial is rotated to adjust
shutter speed or aperture. Change the program shift direction.
—
Mode Dial
Function You can assign registered Myset settings to any position on
the mode dial.
—
T Release/j/Image Stabilizer
Option Description g
Rls Priority S If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 49) and C-AF (P. 49) modes.
—
Rls Priority C
j L fps
Choose the frame advance rates for [
S] and [T]. Figures
are the approximate maximums.
54
j H fps
j Image
Stabilization
Activates/deactivates image stabilization for continuous
shooting.
—
Half Way Rls With
IS When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
—
Lens I.S. Priority If [On] is selected, priority is given to the lens function operation
when using a lens with an image stabilization function.
• This option has no effect on lenses that are equipped with
an image stabilization switch.
—
Release Lag-Time If [Short] is selected, the time lag between fully pressing the
shutter button and the shot being taken can be shortened.*
—
* This will shorten the battery life. Also make sure that the camera is not subject to sharp
impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If
this happens, turn the power off and on again.
MENU c
S
MENU c
T