Olympus PEN E-PL8 - Manual (Page 48)

48 EN
Shooting
2
Zoom frame AF/zoom AF (Super Spot AF)
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
01:02:03 01:02:03
30 30
250 250 F5.6 0.0 0.0
L N
S-IS AUTO S-IS AUTO
ISO-A
200
Wi-Fi
FHD F
Shooting display
01:02:03 01:02:03
30 30
250 250 F5.6 0.0 0.0
L N
S-IS AUTO S-IS AUTO
ISO-A
200
Off
Wi-Fi
FHD F
Zoom frame AF Zoom AF
U U
U U
U U
U
(Press and hold)
/
z
1 Press and release the U button to display the zoom frame.
• If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use
FGHI to position the zoom frame.
• Press the
INFO button and use FG to choose the zoom ratio. (×5, ×7, ×10, ×14)
2 Press and release the U button again to zoom in on the zoom frame.
• Use
FGHI to position the zoom frame.
• You can change the zoom ratio by rotating the control dial (P).
3 Press the shutter button halfway to initiate autofocus.
• The camera will focus using the subject in the frame at the center of the screen. To
change the focus position, move it by touching the screen.
• You can also display and move the zoom frame using touch screen operations.
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
• When you are using a Four Thirds system lens, the AF will not operate with during zoom
display.
• While zoomed in, a sound is made by the IS (Image Stabilizer).