Panasonic Lumix DMC-G85M - Manual (Page 42)

2. Getting Started/Basic Operations
42
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/
rear dials using the function button to which [Dial Operation
Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn11] at the time of
purchase.
(P55)
A Function button [Fn11]
• You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
(P43)
1
Press [Fn11].
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
• If no operations are performed, the guide will disappear in
a few seconds.
2
Rotate the front/rear dials while the guide is
displayed.
•
The settings of the items assigned to the dials will change.
3 Press [MENU/SET] and set.
•
You can also complete this step by performing either of the operations below:
– Press the shutter button halfway
– Press [Fn11]
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1
) or setting screen (step
2
) is displayed.
A
98 98 98 0
ISO ISO ISO ISO
WB WB WB WB
WB WB WB WB WB WB WB WB WB WB WB AWB AWB
ISO ISO ISO ISO