Overheat indicator, P322 – Panasonic Lumix DMC-G85M User Manual
Page 322
12. Others
322
•
This is characteristic of MOS sensors which serve as the camera’s
pickup sensors.
This is not a malfunction.
•
When using the electronic shutter
, lowering the shutter speed
may reduce the effect of the horizontal stripes.
•
If noticeable flicker or striping is seen under lighting such as a
fluorescent or LED lighting fixture when recording motion pictures, you can reduce the flicker or
striping by setting up [Flkr Decrease]
and fixing the shutter speed. It is possible to select
a shutter speed from [1/50], [1/60], [1/100], or [1/120]. You can set the shutter speed manually
in the Creative Video Mode.
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
> Decrease the ISO sensitivity.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
•
There may be defective pixels in the image sensor.
> Perform [Pixel Refresh]
.
•
When the ambient temperature is high or 4K photo recording is performed continuously, the
camera may display [
] and recording may stop. (If [
] ([4K Pre-Burst]) is selected, the
setting changes to [
] ([4K Burst]) before recording stops.) Wait until the camera cools down.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
Stripes appear in high ISO sensitivity.
The brightness or the hue of the recorded picture is different from the actual
scene.
Bright spot not in subject is recorded.
4K photo recording stops before finishing.