LinPlug RMV - Manual (Page 38)

Audio Modules
Snare 1
The Snare1 module combines an oscillator with a noise source.
The Snare 1 Percussion Synthesis module contains the following controls:
Osc(illator) Shape: The Osc(illator) Shape control is used to set the shape of the
oscillator waveform. When turned fully anti-clockwise the oscillator
produces a sine wave, while when turned fully clockwise the
oscillator produces a pulse wave. In intermediate positions the
oscillator produces a hybrid waveform.
Osc(illator) Frequency: The setting of the Osc(illator) Frequency control determines
the drum's fundamental frequency. The frequency changes from low
to high as the dial is turned in a clockwise direction. This control
interacts with the Tune control on the associated Drum Pad.
Osc(illator) Attack (Time): The Osc(illator) Attack (Time) control is used to set the drum
oscillator's attack time. Setting this control to a high value delays the
onset of the drum waveform, creating damping or muffling effects.
Osc(illator) Decay (Time): The Osc(illator) Decay (Time) control determines how fast the
sound decays after it is triggered. The decay time changes from short
to long as the dial is turned in a clockwise direction.
Osc(illator) Pitch Mod(ulation): The Osc(illator) Pitch Mod(ulation) control is used to set
the extent to which the drum's pitch is controlled by the oscillator's
pitch envelope.
LinPlug Reference Manual 5.0.1 38