The roles menu, The roles menu, 29, Roles – Bang & Olufsen BeoSound 5 User Guide User Manual
Page 29

29
The Roles menu
Your music system can take part
in a Timer programmed on an
audio or video master in your link
setup.
This means that if you activate
the function in your music
system, the speakers connected
to your music system will start
playing at the programmed time.
In the ROLES menu, you can
change which remote control
button should activate the music
and radio playback.
From the factory, the N.MUSIC
button activates the music
playback from BeoMaster 5 (or
another music server you have
chosen).
The N.RADIO button activates
radio from the internet.
On Beo4 both buttons are found
in the LIST menu. If you have a
Beo4 and use the sources often,
we recommend you to change
the source names and have the
CD or A.MEM button activate
the N.MUSIC and the RADIO
button activate the N.RADIO
source instead.
To use the speakers connected to your
music system, you must activate the Play
Timer in BeoSound 5. Once activated it
remains active until switched off again.
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight ROLES.
> Turn the wheel to select PLAY TIMER and
press GO.
> Turn the wheel to select ON and press
GO.
> Use the pointer to leave the menu.
Contents of the ROLES menu.
The sources available in your music
system can also be used as sources of a
programmed Timer.
If the Timer uses N.MUSIC as source,
playback will start from the red
favourite list. Therefore, if nothing is
stored in the red list, nothing is played.
If the Timer uses N.RADIO as source, you
can select a numbered favourite
(channel), if nothing is stored on the
selected channel number in your music
system, nothing is played.
Remember that if you have changed the
name of the BeoSound 5 sources, the new
names are the ones to be selected when
programming a Timer.
Activate Play Timer
PLAY TIMER
AUDIO MASTER
AM OPTION
N.MUSIC
N.RADIO