Bang & Olufsen BeoSound 5 User Guide - Manual (Page 11)

11
Adjust sound settings
Store your preferred sound
settings. When you store a
sound setting, your system starts
playing at this level every time
you switch it on.
Sound settings are preset from
the factory to neutral values
which suit most listening
situations.
When you connect BeoLab 5
speakers to the music system,
this must be set up in the
SPEAKER TYPE menu.
The SOUND menu is not available
when your music system is set to
Option 0.
Adjust volume, bass or treble
You can preset levels for sound volume,
bass, treble and balance.
The loudness feature compensates for
the human ear’s lack of sensitivity to
high and low frequencies. These
frequencies are boosted at low volume
levels so that low music becomes more
dynamic.
Make sound settings …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight SOUND.
> Turn the wheel to select the sound
element you wish to adjust; VOLUME,
BALANCE, BASS, TREBLE, LOUDNESS or
SPEAKER TYPE and press GO. The current
value is the ‘wheel focus’ upon entry.
> Turn the wheel to adjust the sound
setting and press GO to store.
While adjusting sound, the speakers react
according to the adjustment.
Volume 0 mutes the sound. It is not possible
to store volume level 0 or volume levels
above 75.
If your music system is set to Option 0, the
volume display on the music system always
shows the stored volume.
VOLUME
BALANCE
BASS
TREBLE
LOUDNESS
SPEAKER TYPE