Service settings – Bang & Olufsen BeoSound 5 User Guide User Manual
Page 15
15
Service settings
In the SERVICE SETTINGS menu,
you can increase the internet
radio buffer time and disable the
MOTS function.
You can make setting for the
optional CD-Rip to decide if
ripping should take place
automatically and if the CD
being ripped should be played
automatically while being ripped.
If you want to use the CD
Ripping Device mainly as a CD-
player, you must change the
default settings here.
You can also bring up the
“hidden” menus to select music
storage.
N.RADIO buffer
If the sound seems to drop out when
you listen to internet radio, you can
optimise reception from a poor internet
connection or a poor netradio stream by
increasing the buffer time.
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight SERVICE
SETTINGS.
> Turn the wheel to select N.RADIO BUFFER
and press GO.
> Turn the wheel to select a buffer length
in seconds and press GO.
Note that when the buffer length is
increased, the radio start-up time may also
increase.
Bang & Olufsen cannot vouch for the quality
of net radio stations available from
programme providers.
Disable MOTS
The MOTS function automatically uses
the last track in your play queue to
generate a series of similar tracks. MOTS
is enabled from the factory. However, if
you only want to listen to music you
have actively selected, you can disable
the MOTS function.
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight SERVICE
SETTINGS.
> Turn the wheel to select DISABLE MOTS
and press GO.
> Turn the wheel to select YES and press
GO.
When MOTS is disabled, music only plays
when you have manually added it to the play
queue.