Bang & Olufsen BeoSound 5 User Guide User Manual
Page 14

14
>> The maintenance menu
Automatic software update
We recommend that you leave the
automatic software update setting
on.
Automatic software update …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS
and press GO.
> Use the pointer to highlight
MAINTENANCE.
> Turn the wheel to select AUTOMATIC
SOFTWARE UPDATE. Press GO,
> Select YES or NO and press GO to
store. The setting is enabled from the
factory.
> Use the pointer to leave the menu.
NOTE! We recommend that you do not
change the setting ‘AUTOMATIC
SOFTWARE UPDATE –YES’. If the setting
is disabled, the system does not
automatically look for new software
updates.
Eject disc
If your music system is equipped with
the optional CD Ripping Device, you can
use this function to eject a loaded disc.
However, EJECT DISC is also always
available as an option under all sources.
Eject a loaded disc …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and
press GO.
> Use the pointer to highlight
MAINTENANCE.
> Turn the wheel to select EJECT DISC, and
press GO.
For information on how to make settings for
the optional CD Ripping Device, see “Service
settings”.
If you use the CD Ripping Device mainly as a
CD-player, you should set the AUTO-RIP
function to OFF.
CLEAN-UP
UPDATE SOFTWARE
AUTOMATIC SOFTWARE UPDATE
EJECT DISC
LATEST RELEASE INFORMATION
ABOUT