Bang & Olufsen BeoSound 5 User Guide - Manual (Page 19)

19
Network setup
The system can be set up in a
network either with a wired or a
wireless connection. For the most
reliable network connection
Bang & Olufsen recommends
making a wired connection.
Bang & Olufsen also recommends
the use of a separate router and
access point – a Network Link
router – to ensure the most
reliable playback of digital music.
Installation and setting-up of the
BeoSound should always be
made by a Bang & Olufsen
installer.
For more information about
Bang & Olufsen network setup,
contact your retailer.
Network Link router
The BeoSound 5 must be connected to
the Network Link router. This can be a
wired connected or a wireless
connection. When using the internal
hard disk we recommend a wired
connection. A wireless solution requires
a wireless USB network adaptor, which
must be purchased separately. Once
connected BeoSound 5 can play back
music stored on a NAS also connected to
the Network Link router.
When using a NAS, music must of course be
available on the NAS.
See network information
You can see the settings made for your
network connection in the NETWORK
INFO menu.
> Use the pointer to highlight MODE on
your music system.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight NETWORK
INFO. You can now see the settings made
for your network connection.
For information about changing host name
or password, see the next page.
INTERNET
EXISTING
ROUTER
NETWORK
LINK
ROUTER
NAS
BEOMASTER 5
BEOSOUND 5
BEOSOUND 5
ENCORE