Socket panel – Bang & Olufsen BeoVision 8-26/32 User Manual
Page 25

2
Socket panel
The socket panel on your television
allow you to connect signal input
cables as well as a variety of extra
equipment, such as a video recorder
or DVD.
The AV sockets are the primary
sockets for connection of extra
equipment. Any equipment you
connect to these sockets must be
registered in the CONNECTIONS
menu. For further information, refer
to the chapter ’First-time setup of
your television’ on page 0.
~
Connections to the mains.
AV 1*
21-pin socket for the AV connection of a primary
external tuner, such as a set-top box or a DVD
recorder.
AV 2 / Y – Pb – Pr
21-pin socket for the connection of additional
equipment, such as a DVD, a set-top box or a
recorder, or for connection of a link tuner.
AV3
R – L: Right and left line signal (audio).
VIDEO: Video signal.
AV3 – VGA
VGA connection for receiving analogue graphics
from an external PC. Supports the following
screen resolutions: 0 Hz; 480p, p, 00p,
20p, 8p.
AV 4
21-pin socket for the AV connection of other
equipment.
POWER LINK
For connection of external Bang & Olufsen loud-
speakers. Connect a Power Link splitter if your
connected loudspeakers have only one Power Link
socket.
C1 – C2
For IR control signals to external equipment
connected to the AV sockets.
HDMI
(High Definition Multimedia Interface) to be used
in conjunction with an AV socket. For connection
of an HDMI video source or a PC.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen music system. The socket is also used for
BeoLink distribution of sound throughout the
house.
MODULATOR
Not for use in this setup.
AV 1
AV 4
MASTER LINK
RF
OUT
AV 2
POWER LINK AV3
VGA
HDMI
AV 2
AV 3
C1
C2
*Note! To connect equipment to the AV1, AV2 and
AV4 sockets, an adaptor will be necessary.