Bang & Olufsen BeoVision 8-26/32 - Manual (Page 13)

1
Use your television as a computer monitor
If you connect your television to a
computer, as described on page 2,
you can use it as a monitor.
IMPORTANT! If you wish to connect a
computer to the television and use the
television as a monitor, make sure that you
disconnect the television, the computer,
and all equipment connected to the
computer from the mains before you
connect the computer and the television
to each other.
When in use, the computer must be
connected to a grounded wall outlet as
specified in the computer’s setting-up
instructions.
To see the computer picture on the television
screen, you must bring it up with Beo4.
To bring up the computer
picture …
Press repeatedly until PC*
appears in the Beo4 display
Press to bring up the picture
You can then operate the
computer as you normally would.
*In order to display PC on Beo4,
you must first add it to the Beo4
list of functions. For further
information, refer to the chapter
‘Customise Beo4’ on page 36.
The television supports the following screen
resolutions: 60 Hz; 480p, 576p, 600p, 720p, 768p.
Bring up the computer image on the screen
LIST
PC
GO