Bang & Olufsen BeoVision 8-26/32 - Manual (Page 19)

19
When you are in the link room, you can
operate all connected systems with the Beo4
remote control.
Use sources present only in one of the
rooms …
> Press the button for the source you wish to use;
operate the selected source as usual.
Use a main room source – present in both
rooms …
> Press LIST repeatedly on Beo4 until LINK* is
shown in the display.
> Press the button for the source you wish to use;
operate the source as usual.
If you only wish to switch on audio mode from a
main room video source, press LIST repeatedly
until AV.V is shown in the display instead of LINK,
then press the button for the source you wish to
use and operate the source as usual.
Use a link room source – present in both
rooms …
> Press the button for the source you wish to use;
operate the source as usual.
Listen to stereo sound in your link room …
Usually sound distributed from a main room video
source, such as a set-top-box, to the link room is
transmitted in mono. However, you can select
stereo sound:
> Press DTV to switch on the television.
> Press LIST repeatedly until AV* is shown in the
Beo4 display..
> Press DTV to activate a source connected to the
main room system, such as a set-top box.
While using this function, distribution of other
main room sources to other link room systems is
not possible. You can only listen to stereo sound if
your television is set for Option .
*In order to display LINK, AV and AV.V on Beo4,
you must first add them to the Beo4 list of
functions. For further information, refer to the
chapter ‘Customise Beo4’.
Link room operation
Main Room Link Room