Connect digital sources – Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) User Manual
Page 8
8
>> Connections
Connect digital sources
Connect external HDMI sources, such as
a set-top box, computer or game
console. All equipment connected to the
television can be configured,
Depending on the type of equipment you
connect to the television, different cables
and maybe also adaptors are needed. If you
have more than two types of equipment that
need a PUC socket, you must buy an extra
PUC cable. Cables and adaptors are available
from your Bang & Olufsen retailer.
Connect a set-top box
> Connect the cable to the appropriate
socket on the set-top box.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
set-top box, connect an IR-transmitter to
one of the PUC sockets and attach it to
the IR-receiver of the set-top box.
page 11 for more information on IR-
.
> Follow on-screen instructions to configure
the source.
Connect a DVD/Blu-ray player
> Connect the cable to the appropriate
socket on the DVD/Blu-ray player.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
DVD/Blu-ray player, connect an IR-
transmitter to one of the PUC sockets and
attach it to the IR-receiver of the DVD/Blu-
ray player.
information on IR-transmitters
.
> Follow on-screen instructions to configure
the source.
Connect a game console
> Connect the cable to the appropriate
socket on the game console.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
game console, connect an IR-transmitter
to one of the PUC sockets and attach it to
the IR-receiver of the game console.
page 11 for more information on IR-
> Follow on-screen instructions to configure
the source.*
1
Connect a camera
> Connect the cable to the appropriate
socket on the camera.
> Run the cable to an HDMI IN socket on the
television.
> Follow on-screen instructions to configure
the source.
PUC 2
A+B
PUC 1
A+B
EXT. IR
1
2
3
4
5
S/P-DIF
IN
AV
IN
PUC 3 A+B
CTRL 3
Example of connected digital sources.
Set-top box
DVD/Blu-ray player
Computer
Game console
Camera
1
*When selecting GAME CONSOLE as source,
the picture mode GAME is activated as
default setting. You can change this setting
temporarily in the PICTURE menu,