Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) - Manual (Page 17)

17
Adjust sound and picture settings
Sound and picture settings are
preset from the factory to neutral
values which suit most types of
programmes. However, if you
wish, you can adjust these
settings to your liking.
Adjust sound settings such as
volume, bass and treble and, for
wired speakers, enable eco
mode. Picture settings include, for
example, contrast, brightness,
colour, and viewing distance.
Change your sound and picture
settings temporarily – until your
television is switched off – or
store them permanently.
Activate different picture modes,
for example, game mode if you
connect a game console to your
television.
For information about how to
change the picture format, see
Getting Started.
Adjust sound settings
Adjust sound settings via the SOUND
menu. Temporary settings are cancelled
when you switch off the television.
If you choose to enable eco mode, all
wired speakers in a speaker group that
do not receive a signal will switch off
and save power.
In the AUDIO DESCRIPTION menu, you can
set the television to describe what happens
on the television screen by means of sound.
Remember to enable the VISUALLY
IMPAIRED menu field in the LANGUAGES
menu under REGIONAL SETTINGS.
Adjust picture settings
Adjust the picture settings via the
PICTURE menu. Temporary settings are
cancelled when you switch off the
television.
To temporarily remove the picture from the
screen, press LIST and use the navigation
button up or down to bring up P.MUTE in
the Beo4 display and press the centre
button. To restore the picture, press a
source button. (Beo6: press to bring up
the Scene display on Beo6, press Picture,
then press P.Mute. To restore the picture,
press P.Mute again).
MENU
SETUP
SOUND
SOUND ADJUSTMENT
…
MENU
SETUP
PICTURE
PICTURE ADJUSTMENT
…