Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) - Manual (Page 43)

43
Operate two televisions in one room
If you have placed your television
in a room where you already
have a Bang & Olufsen television,
and commands from your
remote control can be received
by both televisions, you must
change the Option setting for
one of the televisions. This
prevents simultaneous activation
of both televisions.
One television must be in Option
1 or 2 and the other television
must be changed to Option 4.
Connection via a BeoLink
Converter NL/ML is not required.
Option setting of your television
is done via the PRODUCT
INTEGRATION menu,
see page
40 . Note that if the television is
set to Option 4 in the television
menu and you use a Beo4
remote control, you must press
LINK and then select a source
on Beo4.
One remote control for both televisions
For your television to function properly,
it is essential that the television is set to
the correct Option.
Beo4 – Operate your television in
Option 4 …
Normally, you can activate a source, such
as TV, simply by pressing the relevant
source button on your remote control.
However, when you set your television
to Option 4, you must do the following,
if you have a Beo4:
Press to bring up LINK in the
Beo4 display
Press a source button, such as
TV
If you have more than one remote control
and a specific Beo4 is always used for the
television set to Option 4, you can set up the
Beo4 to send commands to this television
without pressing LINK first. Find ZONE in the
Beo4 setup menu and select LINK.
LIST
LINK
TV
TV
LIST
LINK
TV
Zone ‘B’
TV
Zone ‘A’
TV
For information about choice of zone,
contact your retailer.