Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) - Manual (Page 4)

4
Understanding the guide
To activate picture modes with Beo4
directly …
Press to bring up PICTURE in
the Beo4 display
Press to select a picture mode
Step between modes
Press and hold to remove
PICTURE from the display
This menu hierarchy illustrates the path
into a menu where you can make
different settings. Press MENU on your
remote control and use the navigation
button down and the centre button to
select and open the menus.
When available, you can also press the
blue button on your remote control to
bring up help texts.
Remote control operation
Where relevant, the remote control
operation will be shown.
– A dark grey button indicates a hard
button you must press.
– A light grey button indicates a Beo4/
Beo6 soft button. Press LIST on Beo4
to bring them up. (Beo6: Press ). The
button appears in the Beo4/Beo6
display.
– The navigation button is symbolised
by and is used to indicate in
which direction you must move the
navigation button.
– The centre button is symbolised by
and is used when you must press the
centre button.
Menu operation
LIST
PICTURE
1 – 3
BACK
Example of Beo4 remote control operation.
Example of menu operation.
Continues …
MENU
SETUP
SOUND
…