Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) - Manual (Page 19)

19
Set up 3D television
You can set up preferences for
watching 3D television. Select if
the television should switch to
3D mode automatically, when
automatic 3D signalling is
available.
You can select if the television should
activate 3D mode automatically,
manually or by prompt, when it detects
automatic 3D signalling the first time
after source or channel change. The
default setting is PROMPT.
To activate 3D, bring up the ACTIVATE 3D
menu and follow on-screen instructions.
When automatic 3D signalling is available,
and ACTIVATE 3D is set to AUTO, the
television switches to 3D mode automatically.
If it is set to PROMPT, you must select
between VIEW IN 3D and VIEW IN 2D. If it is
set to MANUAL, you must enter the menu
and switch to 3D mode manually.
Activate 3D and adjust settings
MENU
SETUP
PICTURE
3D DISPLAY
3D SETTINGS
ACTIVATE 3D