Loudspeaker setup – surround sound – Bang & Olufsen BeoVision 11 with Beo4 User Guide (No tuner) User Manual
Page 14
14
Loudspeaker setup – surround sound
Add BeoLab speakers and
BeoLab subwoofers to your
television wired, or wirelessly if
your television is equipped with
a wireless Power Link module,
and you have a surround sound
system which fits easily into your
living room. You get the best
sound experience in the area
bounded by the speakers.
You can also create speaker
groups to customise the speaker
setup for listening positions other
than the one in front of the
television, for example, at the
dining table or in an armchair.
This guide describes how to
make a basic loudspeaker setup.
For more advanced sound
settings and adjustments, see
the Technical Sound Guide on
For information about daily use
of speaker groups,
Your content provider may have
prohibited distribution of digital wireless
sound to your speakers. You must then
use wired Power Link connected
speakers instead.
Set up the speakers
When setting up wired speakers, you
must select which speakers you have
connected to each Power Link socket in
the SPEAKER CONNECTIONS menu. If
your television is equipped with a
wireless Power Link module it attempts
to detect the type of wireless speakers
itself, but it is also possible to select
which wireless speakers you have
connected to each wireless Power Link
channel manually.
Important! If you select LINE as speaker type
in the SPEAKER CONNECTIONS list, the
volume will be very loud and you cannot
adjust volume with your Beo4/Beo6 remote
control. You must use the product’s own
remote control. LINE is used for, for example,
non-Bang & Olufsen amplifiers.
Wireless speakers
If you have wireless speakers in your setup,
the television automatically scans for
wireless speakers and associate the detected
speakers with wireless Power Link channels
during first-time setup. However, you can
also scan for wireless speakers and associate
the detected speakers with the television’s
wireless Power Link channels manually in the
SPEAKER CONNECTIONS menu.
Scan for and associate wireless
speakers …
In the SPEAKER CONNECTIONS
menu press to rescan
When the scanning is
completed, press to associate
the detected speakers with the
television
Disassociate a speaker from the
television …
Select a speaker in the
SPEAKER CONNECTIONS menu
Press once to be able to
disassociate the speaker. Press
again to confirm disassociation
To be able to reconfigure disassociated
wireless speakers, remember to reset the
speakers. See the guide enclosed with the
speakers.
MENU
SETUP
SOUND
SPEAKER CONNECTIONS
…
Continues …