Epson BALUNS FG01281 - Manual (Page 33)

Using the Document Camera 33
Projecting Transparencies
The document camera enables you to project both positive and
negative film with great clarity. Follow these steps:
1. Place your film or slides on the document camera’s stage with the
dull side facing up.
2. Do one of the following to turn the upper lamps off and the base
lamp on:
■ Press the UPPER LAMP button on the remote control, and
then the BASE LAMP button.
■ Press the LAMP button on the document camera.
3. If you’re projecting negative film, press the POSI/NEGA button
on either the remote control or document camera.
If you want to continue normal projection when you’re done, turn the
base lamp off and the upper lamps on again. If you were projecting
negative film, press the
POSI/NEGA button again to return to normal
display.
PAUSE
LAMP POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET CALL
TELE ZOOM
MAIN INPUT
WIDE NEAR FOCUS FAR
UPPER BASE
SET IMAGE CALL
Switches between normal
projection and negative film
projection
Turn upper lamps off and
base lamp on
note
It may take a few seconds for
the base lamp to come on.
INPUT PAUSE
CLEAR MODE
MAIN
RGB1
RGB2
IRIS
ZOOM
OPEN CLOSE
TELE WIDE AUTO FOCUS
AUTO/MANUAL
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
UPPER / BASE / OFF
Turns the
lamps on
and off Switches between
normal projection and
negative film projection