Lanner RS12-38800 - Manual (Page 57)

RS12-38800
57
C. Appendix C: Console Redirection
Console redirection lets you maintain a system from a remote location by
re-directing keyboard input and text output through the serial port. This
section will tell you how to use this feature.
1. Attach the console cable to the RS12-38800 and Remote Client
System.
2. Choose the following settings in the BIOS Setup menu for
RS12-38800.
BIOS > Advanced > Remote Access Configuration > Serial Port Mode > [115200, 8 ,
n , 1 ](Defult）
3. Configure Console Redirection on the client system. The following
example is applicable for a Windows platform:
A. Click the start button, point to Programs > Accessories >
Communications and select Hyper Terminal.
B. Enter any name for the new connection and select any icon.
C. Click OK.
D. From the “Connect to”. Pull-down menu, select a Com2 port
available on the client system and click OK.
E. Select Baud Rate > 115200 > Flow Control > None.
F. Select Data bit > 8.
G. Select Parity Check > None.
H. Select Stop bit > 1.
I. Power on the RS12-38800, and it should display the BIOS
information on the client system..