Lanner RS12-38800 - Manual (Page 33)

RS12-38800
33
2.2 Mechanical Overview
This section of the manual describes the mechanical and device
nomenclature of the RS12-38800.
2.2.1 Face Panel LED Status and Behavior
Figure 5 – RS12-38800 Front Panel
The following table provides a description of each LED on the RS12-38800
front panel:
Console Port: The console port cable connects RS12-38800 to
the host PC via. The Default baud rate is 115200
• LAN Connector: Require an Ethernet RJ-45 cable
• LCM & Keypad: Please reference the Appendix B
LED Color Status Description
Green
On Indicates when RS12-38800 power is
switched ON
PWR
N/A Off No power connected
Yellow On Hard disk is being accessed
HDD
N/A Off No Data is being accessed
Green On LAN is connected Ethernet Ports
Link/ACT
Orange Flash Data is being accessed
Status Lanner Provide the Sample Codes（Please
reference the Driver/ Manual CD, under
“LED Status” for more information）