Lanner RS12-38800 User Manual
Page 40

RS12-38800
40
"Rack Mount Instructions - The following or similar rack-mount instructions are
included with the installation instructions:
i.
Elevated Operating Ambient - If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing
the
equipment in an environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
ii.
Reduced Air Flow - Installation of the equipment in a rack
should be such that the amount of air flow required for safe operation of the
equipment is not compromised.
iii.
Mechanical Loading - Mounting of the equipment in the rack should
be such that a hazardous condition is not achieved due to uneven mechanical
loading.
iv.
Circuit Overloading - Consideration should be given to the connection
of the equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate consideration
of equipment nameplate ratings should be used when addressing this concern.
v.
Reliable Earthing - Reliable earthing of rack-mounted
equipment should be maintained. Particular attention should be given to
supply connections other than direct connections to the branch circuit (e.g. use
of power strips)."
CAUTION :
Slide/rail mounted equipment is not to be used as a shelf or a work space.