Lanner RS12-38800 User Manual
Page 48
RS12-38800
48
SYS/CPU/Power FAN Speed, CPU Vcore, FBD_VCC, +3V, +5V, +12V,
FBD_VTT, -12V, 5VSB,VBAT: These items display the current status of all of the
monitored hardware devices components such as CPU voltages, and all fans’
speeds.
USB Configuration: Press
screen appears:
Legacy USB Support: Enables support for legacy USB. AUTO disable legacy
support if no USB devices are connected.
Configuration options: [Disable] [Enable] [Auto].
USB 2.0 Controller Mode: Configures the USB 2.0 controller in HiSpeed or
FullSpeed).
Configuration options: [FullSpeed] [HiSpeed].
BIOS EHCI Hand-Off: this is a workaround for Oses without EHCI hand-off
support. The EHCI ownership change should claim by EHCI driver.
Configuration options:[Disable] [Enable].
Hotplug USB FDD Support: A dummy FDD device is created that will be
associated with the hot plugged FDD later. AUTO creates this dummy device only if
there is no USB FDD present.
Configuration options: [Disable] [Enable] [Auto].
USB Mass Storage Device Configuration: Press
sub-menu and the following screen appears: