Lanner RS12-38800 - Manual (Page 12)

12
2.1.3 Jumper Settings and I/O Connectors
The jumper settings and I/O connectors of the EM-8675 board are specific
to the FW-8890. Changing these settings may result in malfunctions or
damage to your system.
Jumper Settings and I/O Connector Summary for EM-8675：
FUNCTION JUMPER
PKMB1 2x4 Header PS/2 Keyboard & Mouse Connector (2.54mm)
CCMOS2 Clear CMOS Data
IDE1 40 Pin IDE Interface Connector (2.54mm)
CN1 Compact Flash Connector
FPIO1 9 Pin Front Panel Connector (2.54mm)
CPUFAN1／AUXFAN1 3 Pin Smart FAN Header
AUXFAN2 ~ AUXFAN3 3 Pin FAN Header
ATXPWR1 8 Pin Power Connector
LUSBCOM1 2X20 Pin BOX Connector (2.00mm)
VGACON1 12 Pin External VGA Header (2.54mm)
JP1 1x2 Pin Compact Flash Mode (2.54mm)
JP2 4 Pin TACT Power Button
JP3 4 Pin TACT Reset Button
JP8 ~ JP11 1x3 Pin Select KEYPAD or USB_RJ1 Lan LED (2.54mm)
JP12 2 Pin For TTL1 detect
JP13 2 Pin For TTL2 detect
JP14 1x2 Pin For SIO GPIO Pin (2.54mm)
JP15 1x2 Pin For SIO GPIO Pin (2.54mm)
JP16~JP18 1x3 Pin Select Bypass Function (2.54mm)
JP19 1x2 Pin For I2C BUS Pin (2.54mm)
CON1 10 Pin Smart FAN Connector
CON3 10 Pin SMD OPMA_LAN Connector (2.54mm)
WP1 1x3 Pin U41 Flash Rom Write Protect (2.54mm)
IPMI1 1x3 Pin Header (2.54mm)
SATA1~SATA6 180º SATA Connector
PCIEC6 PCI Express x4 Standard Connector
PCIEC3 ~ PCIEC5 Splint PCI Express x8 Standard Connector