Lanner FW-8893C - Manual (Page 9)

4
Introduction
Chapter 1
Network Application Platforms
F6 13 GbE Ports (LAN3~LAN10 are provided by Intel i350 and LAN11~LAN14 (not for FW-8893C) are provided by Intel i347)
LINK/ACT (Yellow) SPEED (Green/Amber)
On/Flashing: The port is •
linking and active in data
transmission.
Amber: The connection •
speed is 1000Mbps.
Off: The port is not linking. • Green: The connection •
speed is 100Mbps
Off: The connection speed •
is 10Mbps.
F7 10G SFP+ (provided by Intel 82599ES)
The Fibre Channel LEDs indicate the status of the Fibre Channel ports.
Two LEDs are used to indicate the state and speed of the operation of each Fibre Channel port. The left LED indicates the link
state and the right LED indicates link activity
LED state Link state
OFF Non-link
ON Link
ON ACTIVE
LED state Link activity
OFF Non-link
ON Link
BLINKING Active in data transmission
With Intel i347 and i350, it equips with Intel Virtualization for Connectivity (VT-c) as part of the Intel Virtualization Technology
suite to improve networking and I/O throughput on a virtualized system (you also need to turn on the CPU Virtualization
in the BIOS menu). Moreover, 2 pair (LAN7-LAN8, LAN9-LAN10 on the Ethernet module can be configured as LAN Bypass
(Lanner Generation 3) when failure events occur (depending on the type of LAN modules). This feature can be implemented
with a watch dog timer to enable it automatically. Refer to your User’s Manual CD for a sample implementation of this
feature.