Lanner FW-8893C - Manual (Page 34)

29
Bios Settings
Chapter 4
Network Application Platforms
Boot Configuration
Select the Boot tab from the setup screen to enter the Boot
BIOS Setup screen. You can select any of the items in the
left frame of the screen, such as Boot Device Priority, to
go to the sub menu for that item. You can display an Boot
BIOS Setup option by highlighting it using the
keys. Select an item on the Boot Setup screen to access
the sub menus for the following described functions.
Boot Settings Configuration
In this screen, you will be able to configure the boot
procedures and the related elements.
Items Options
Setup Prompt Timeout Specify the number of seconds
for the boot setup prompt to
wait for user’s intervention
during the POST.
Bootup Num-Lock State This option allows you
to enable or disable the
function of the NumLock
key.
Quiet Boot Enabling this item allows the
BIOS to suppress the message
displayed during the POST.
Fast Boot Select enabled to accelerate
the boot speed and disabled
to go back to normal boot.
The following items appear
when you set fast boot to
“Enabled”.
VGA Support:
Auto- only legacy optional
ROM with legacy OS will be
installed but the logo will not
be shown when booting.
EFI - the EFI driver will be
installed along with the EFI
OS.