Chapter 4, Bios settings – Lanner FW-8893C User Manual
Page 25

20
Bios Settings
Chapter 4
Network Application Platforms
CPU Configuration Settings
You can use this menu to enable/disable certain functions
of your CPU. Use the up and down
an item. Use the
value of the selected option. A description of the selected
item appears on the right side of the screen. The settings
are described below.
CPU Information
You can use this screen to view the basic information and
capabilities of your CPU. For instance, the clock rate and
L1 to L3 cache sizes are displayed here.
Item
Selection
Intel Hyper-
Threading
The Intel Hyper-Threading Technology
allows a hyper-threading processor to
appear as two logical processors to the
operating system, allowing the operat-
ing system to schedule two threads or
processes simultaneously.
Select to enable or disable this feature.
Active Pro-
cessor Core
Select the number of processor cores to
be active in each processor package.
Limit CPUID
Maximum
Allows legacy operating systems to boot
even without support CPUs with extend-
ed CPUID functions.
Select to enable or disable this function
Execute Dis-
able Bit
Select to enable or disable the No-Execu-
tion Page Protection Technology.
Hardware
Prefetcher
The processor has a hardware prefetcher
that automatically prefetches data and in-
structions from the memory into the Level
2 cache that are likely to be required in
the near future. This reduces the latency
associated with memory reads.
When enabled, the processor’s hardware
prefetcher will be enabled and allowed to
automatically prefetch data and code for
the processor.
When disabled, the processor’s hardware
prefetcher will be disabled.
Adjacent
Cache Line P
Select to enable or disable prefetching of
adjacent line
DCU Stream-
er Prefetch
Enable prefetch of next L1 Data Line
based on multiple loads in the same
cache line.
DCU IP
Prefetcher
Enable prefetch of next L1 line based on
sequential load history.
Intel Virtual-
ization
The Intel VT is a hardware-assisted virtual-
ization. This processor supports Intel Vir-
tualization. Enable or disable this feature.