Lanner FW-8893C - Manual (Page 37)

32
Bios Settings
Chapter 4
Network Application Platforms
Save & Exit
Select the Exit tab from the setup screen to enter the Exit
BIOS Setup screen. You can display an Exit BIOS Setup
option by highlighting it using the keys. The
following table lists the options in this menu.
Item Options
Save Changes and Exit When you have completed
the system configuration
changes, select this option
to leave setup. The system
will decide to either reset
or continue on booting
process depending on
whether a reboot will be
necessary for the changes
to take effect.
Discard Changes and Exit This option allows you
to discard the selections
you made and restore the
previously saved values.
After selecting this option,
a confirmation appears.
Select Yes to discard any
changes and load the
previously saved values.
You will then exit the
program and continue on
the booting process.
Save Changes and Reset When you have completed
the system configuration
changes, select this option
to leave setup and reboot
the computer so the new
system configuration
parameters can take effect.
Discard Changes and Reset This option allows you
to discard the selections
you made and restore the
previously saved values.
After selecting this option,
a confirmation appears.
Select Yes to discard any
changes and load the
previously saved values.
The system will then reset.
Save Changes Save your changes
Discard Changes Discard changes
Restore Defaults Restore to factory defaults
Save as User Defaults Save all of your changes as
an user default setting.
Restore User Defaults Loads your saved user
default setting.