Ion Science GasCheck IS User Manual
Page 19
GASCHECK 5000IS MANUAL
Ion Science Ltd
Page 19 of 40
Unrivalled Detection. www.ionscience.com
Operation
Data Control
This sub-menu has the following topics and are accessed by pressing the key.
Clear data
Data transfer
Logging settings (only accessible in continuous logging mode)
Memory used
single/cont.
In most of these menus the third line shows current settings or values and also ! or X on the middle line.
Data Control - Clear Data
Enter this by a press.
Display
Clear Data Back
All data
X
Note: An X or ! will be required following usual convention on the 2nd line.
Use the up or down scroll keys for other end tree selections:-
Last data
X
Data Control – Data Transfer
Display
Data control Back
Data Transfer X
display No. of files !
Note: An X or ! will be required following usual convention on the 2nd line.
When Data is being transferred, the X changes to a ! and then the Gas Check changes to a blank display
but with the words 'Data transfer' for the duration of the transfer or time-out.