Ion Science GasCheck IS - Manual (Page 18)

GASCHECK 5000IS MANUAL Ion Science Ltd
Page 18 of 40 Unrivalled Detection. www.ionscience.com
Operation
Clock - Set Time
Display
Set time Back
Set hour
existing Clock setting for Time
Other options within this topic are
Set min
Synch RTC
Clock - Set Time - Set hour
A press on the takes us down into this next level. Use UP and DOWN keys to change hour value.
Press PROCEED when this is what you require, and the clock will proceed to minutes then to seconds. If you
are only changing hours for Daylight Saving Time changes then once PROCEED has been actioned the
Back key can be used to return towards the normal display mode with the required changes stored.
Display
Set hour Back
09a
existing Clock setting for Time
Clock - Set Time - Set min
As per Set hour
Clock - Set Time – Synch RTC
This allows users to confirm that the minutes setting conforms to expectations and allows set to 0 seconds.
When the synchronisation time is shown and the minutes are incorrect, press Back to revert to set minutes.
Pressing PROCEED will action the synchronisation to the displayed time and then revert to set time frame.