Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 85)

H8951 3G/4G Router 5 Router config
(2014-07-01) - 69 -
Parameter Details Operation
Route”
When Routing Type is “Static Route”
Network Set the destination IP address and
subnet mask of static route Manual input
Format1: A.B.C.D/Mask
Gateway Type Specify gateway type of static
routing, includes:

interface
 static ip
Dropdown List
Gateway Set a next hop IP address of static
route, IP address of the adjacent
router interface Dropdown List
 If the gateway type select static
IP, gateway need to manually
input, format: A.B.C.D
 If the gateway type select
interface, the gateway needs to
select from dropdown list
When Routing Type is “Policy Route”
Source Type Set source type of policy route Dropdown List
 Static IP

Interface
Network When source type is static route,
need to manually set network
address Manual input
Format1: A.B.C.D/Mask
Source Interface When source type is policy route,
need to manually set source
network address of policy router Dropdown List
 modem
 eth0

eth1
Gateway Type Set the next hop IP of policy route Dropdown List
 static ip
 interface
Gateway When the gateway type select
"Static IP" to fill in the IP address,
when gateway type select the
"interface", it will select the
interfaces as gateway Manual input
Format1: A.B.C.D/Mask
Prority Set policy routing priority, the
priority lower the number, the
higher the priority Value area：[3,252]
Step 4 Single click “save” icon to finish the static routing setting.
Static routing will select the route to forward according to the destination address of the packet receive
from the router, if the router received the packet(source address is 1.1.1.1 destination address is 2.2.2.2),