Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 28)

5 Router config H8951 3G/4G Router
(2014-07-01) - 12 -
LED name Status
Dark：No module or no auto-dial
SYS
Solid light: run ok
4.2 Local config
Precondition
 Already power on H8951 3G/4G router
 Ethernet cable connect to H8951 3G/4G router
You could specify a static IP or DHCP get IP for your computer.
Static IP
Step 1 Click “start > control panel”, find “Network Connections” icon and double click it to enter,
select “Local Area Connection” corresponding to the network card on this page. Refer
to the figure below.
Figure 4-7 Local Area Connection
Step 2 Obtain a IP address automatically, or follow below instruction.
H8951 3G/4G Router default enabled DHCP server. If it has been disabled, DHCP cannot be use.
Step 3 Change or add a IP 192.168.8.* on your computer.