Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 78)

5 Router config H8951 3G/4G Router
(2014-07-01) - 62 -
Parameter Details Operation
Default Action Default actions of the rule. Can be
“accept” or “Drop”:
 Accept: to accept all packages from
this MAC.
 Drop: to drop all packages from this
MAC.
To choose “accept” or
“Drop”
Filter mode To choose “Input”, “Forward” or
“Both”.
 Input: all packages visiting router.
 Forward: all packages forwarded by
router.
 Both: both Input and forward.
To choose “Input”,
“Forward” or “Both”.
Step 4 Single click “save” icon to finish.
---END
5.5 Forward configuration
5.5.1 Overview
Forward function of H8951 3G/4G router includes NAT, Routing, dynamic routing (RIP,
OSPF) (optional) and QoS (optional).
5.5.2 NAT
DNAT configuration rule
DNAT used to replace the destination address of packets accessing external network, router
will replace the destination address of packet accessing external network into the user custom
settings.
Step 1 Log-on WEB GUI of H8951 3G/4G router.
Step 2 Click “Forward > NAT” to open “NAT” tab.