Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 63)

H8951 3G/4G Router 5 Router config
(2014-07-01) - 47 -
Figure 5-32 SNMP configuration
Step 3 Configure SNMP parameter.
Table 5-14 SNMP Parameter instruction
Parameter Details Operation
SNMP service To enable or disable SNMP service Options:
 Enable
 Diable
Basic Config
Port SNMP port, suggest to be default
port161 Value area: 1～65535
Default: 161
Community Community Password of SNMP client
to router SNMP, Used for identification WORD type, max 16 bytes
Trap IP Link-state router report server address Manual input
Format：A.B.C.D/Mask
Trap Port Link-state router report server
address’s port Value area：1～65535
Default：162
Loopback Status Match with "LAN" page loopback
address, in the "Loopback Status" to
"Enable", means loopback address Options:
 Enable
 Diable