Yaskawa GPD505 - Manual (Page 15)

TM4028 7/12/2001
15
Object
ID
Object Name GPD505
Parameter
GPD506
Parameter
Units Default Min Max
AO12 Motor Rated Current n032 n033 A Note 1 Note 2 Note 2
Notes
1. Value dependent on drive capacity. Refer to appropriate Technical Manual.
2. Proper setting is between 10% and 120% of drive’s output current rating (AI14).
4.1.7 Prohibit Frequencies – AO13, AO14, A015
These analog outputs define bands of prohibited frequencies, selected to avoid certain areas of resonant
motor vibration. Two separate bands can be defined, with a common bandwidth. When this feature is
selected, the motor is accelerated and decelerated through the prohibited areas. These objects configure
the drive as described below:
Object
ID
Object Name GPD505
Parameter
GPD506
Parameter
Units Default Min Max
AO13 First Prohibit Frequency n058 n062 Hz 0.0 0.0 400.0
AO14 Second Prohibit Frequency n059 n063 Hz 0.0 0.0 400.0
AO15 Prohibit Frequency BW n060 n064 Hz 1.0 0.0 25.5
4.1.8 Automatic Restarts – AO16
This analog output defines the number of automatic restarts that will be attempted under certain fault
conditions, as described below:
Restartable Faults
• Overcurrent (oC), Overvoltage (ou), Undervoltage (Uu1), Ground Fault (GF)
Non-Restartable Faults
• Overload (oL_), External (EF_), Hardware (CPF_), Fuse Blown (PUF)
• Overcurrent (oC) or Overvoltage (ou) during deceleration
• When Power Loss Ride-Through is disabled (AO18 = 0)
This object configures the drive as described below:
Object
ID
Object Name GPD505
Parameter
GPD506
Parameter
Units Default Min Max
AO16 Number of Auto Restarts n056 n060 - 0 0 10
4.1.9 Display Units – AO17
This analog output defines the display units for speed data (AO1, AO20, AI1, AI2, AI7), as described
below:
AO17 Display Units Description
0 Hz Speed in Hertz (default)
1 % % of maximum drive frequency, specified by GPD505