Yaskawa Σ-III Series - Manual (Page 3)

1 Introduction
E-1
1 Introduction
This safety precautions manual covers Σ-III series SERVOPACK controlling Σ-III series AC
servomotor. To properly use the Σ-III series SERVOPACK, read this safety precautions manual
and user’s manual (see the following table) thoroughly, and retain for easy reference for inspec-
tions and maintenance, and so on. Make sure that these manuals reach the end user.
2 Reference Manuals
This table lists related reference manuals:
3 General Precautions
The following describes general precautions. Note the following to ensure safe application.
• The drawings presented in this manual are sometimes shown without covers or protec-
tive guards. Always replace the cover or protective guard as specified first, and then
operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the
product you received.
• This manual is subject to change due to product improvement, specification modifica-
tion, and manual improvement. When this manual is revised, the manual code is
updated and the new manual is published as a next edition. The edition number appears
on the front and back covers.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa rep-
resentative or one of the offices listed on the back of this manual.
• Yaskawa will not take responsibility for the results of unauthorized modifications of this
product. Yaskawa shall not be liable for any damages or troubles resulting from unau-
thorized modification.
Manual Titles Manual No.
Σ-III Series SGM†S/SGDS User’s Manual SIEPS80000000
Σ-III Series SGM†S/SGDS Digital Operator INSTRUCTIONS TOBPS80000001
Σ-III Series SGM†S/SGDS User’s Manual
For DeviceNet communications
SIEPS80000002
Σ-III Series SGM†S/SGDS User’s Manual
For MECHATROLINK-II communications
SIEPS80000011
Linear Σ Series SGL††/SGDS User’s Manual SIEPS80000016