Yaskawa Σ-III Series - Manual (Page 11)

6 Checking Products on Delivery
E-9
6 Checking Products on Delivery
The following procedure is used to check Σ-ΙΙΙ Series products upon delivery. Check the follow-
ing items when Σ-ΙΙΙ Series products are delivered.
If any of the above items are faulty or incorrect, contact your Yaskawa sales representative or
the dealer from whom you purchased the products.
7 Warning Label
The following illustration shows the SERVOPACK warning label.
8 Nameplate
The following illustration shows the SERVOPACK nameplate.
Check Items Comments
Are the delivered products the ones that
were ordered? Check the model numbers marked on the nameplates of
the SERVOPACK.
Is there any damage?
Check the overall appearance, and check for damage or
scratches that may have occurred during shipping.
Are there any loose screws? Check screws for looseness using a screwdriver.
Disconnect all power and wait 5 min.
before servicing. May cause electric shock.
Use proper grounding techniques.
CAUTION
WARNING
5
Do not touch heat sink when power is ON.
May cause burn.
SERVOPACK warning label
SERVOPACK type
SERVOPACK nameplate
Serial number
Applicable
power supply
Applicable
servomotor capacity
SGDS-02A01A
AC-OUTPUT
S/N
O/N
AC-INPUT
SERVOPACK MODEL
YASKAWA ELECTRIC
MADE IN JAPAN