3 receiving, Option package components, Tools required for installation – Yaskawa PROFINET User Manual
Page 7: Receiving, 3receiving
3 Receiving
YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
7
3
Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function properly.
Option Package Components
Tools Required for Installation
• A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size*) is required to install the option and remove drive front
covers.
• Diagonal cutting pliers. (required for some drive models)
• A small file or medium grit sandpaper. (required for some drive models)
*Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.
Note:
Tools required to prepare option networking cables for wiring are not listed in this manual.
Description:
Option
Ground
Wire
Screws (M3)
LED Label
Installation Manual
_
Quantity:
1
1
3
1
1
NS
MS
MANUAL