Yaskawa PROFINET - Manual (Page 56)

56 YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
11 Specifications
11 Specifications
Table 34 Option Specifications
‹ Profinet Feature Function Availability by Drive Software Version
The following table details availability of certain software version dependant features or functions when using the
Profinet SI-EP3 option with a Yaskawa drive.
Table 35 Feature/Function Availability by Drive Software Version
(When used with SI-EP3 Firmware VST800251)
Item Specification
Model SI-EP3 option
Option Conformance Passed PROFINET Conformance Class A
Connector Type Dual RJ45 8-pin Shielded Twisted Pair Cat 5e cable
Physical Layer Type Isolated Physical Layer
IP Address Setting Programmable from drive keypad or network
Communication Speed
Programmable from drive keypad or network:
10/100 Mbps, auto-negotiate.
Number of Connections 1 PLC connection, 1 supervisor connection, 2 web page connections
Duplex Mode Half-forced, Auto-negotiate, Full-forced
Address Startup Mode Static, DCP
Ambient Temperature -10 °C to +50 °C
Humidity Up to 95% RH (no condensation)
Storage Temperature -20 °C to +60 °C (allowed for short-term transport of the product)
Area of Use Indoor (free of corrosive gas, airborne particles, etc.)
Altitude Up to 1000 m
PROFINET Functions
PROFINET IO
Configurable I/O in cyclic messages
Drive diagnostic alarms
I&M0
IEC Overvoltage Category Intended for use in “Overvoltage Category II” as specified in IEC 60664-1
Feature/function Drive Model No.
Feature/function is
available
Minimum Drive Software
Version Required
A1000 Series Model CIMR-AU
F6-01 - Operation Selection after
Communications Error
Settings 4 & 5
2A††††
4A††††
5A††††
Yes VSA901021
4A0930†††
4A1200†††
No N/A
F6-14 - bUS Error Auto Reset
2A††††
4A††††
5A††††
Yes All
4A0930†††
4A1200†††
Yes VSA903014
F7-14 - Duplex Mode Selection
Settings 3 thru 8
2A††††
4A††††
5A††††
Yes VSA901021
4A0930†††
4A1200†††
No N/A