Yaskawa SI-EP3 PROFINET Technical Manual - Manual (Page 7)

2 Product Overview
YASKAWA ELECTRIC SIEP C730600 69A 1000-Series Option SI-EP3 Technical Manual 7
2 Product Overview
 About This Product
This option provides a communications connection between the drive and a PROFINET network. The option connects
the drive to a PROFINET network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
PROFINET is a communications link to connect industrial devices (such as smart motor controllers, operator interfaces,
and variable frequency drives) as well as control devices (such as programmable controllers and computers) to a
network. PROFINET is a simple, networking solution that reduces the cost and time to wire and install factory
automation devices, while providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a PROFINET master device:
• drive operation
• drive operation status monitoring
• changing parameter settings.
SI-EP3 is PROFINET Conformance Class A certified.
 Applicable Models
The option can be used with the models in Table 1 .
Table 1 Applicable Models
Drive Series Drive Model Number Software Version <1>
<1> See “PRG” on the drive nameplate for the software version number.
A1000
CIMR-A2A
≥1010
CIMR-A4A0002 to 4A0675
CIMR-A4A0930 and 4A1200 ≥3014
CIMR-A5A
504
101
U1000
CIMR-UA
≥1010
CIMR-UE
CIMR-UP
CIMR-UW
U1000L
CIMR-UL
≥6210
CIMR-UF
CIMR-UR
CIMR-US
Z1000U
CIMR-ZA
≥6110
CIMR-ZE
CIMR-ZP
CIMR-ZW
PROFINET_E_conditional.book 7 ページ ２０１５年２月２５日 水曜日 午後５時１７分