3 receiving, Contents and packaging, Tools required for installation – Yaskawa 1000 Series Drive Option - Profibus-DP Installation User Manual
Page 9: 3receiving
YASKAWA ELECTRIC TOBP C730600 42C 1000-Series Option SI-P3 Installation Manual
9
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
on page
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Contents and Packaging
Table 2 Contents of Package
◆
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the
option.
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
Description:
Option
Ground
Wire
Screws
(M3)
LED Label
Installation
Manual
Quantity:
1
1
3
1
1
ERR
BF
RUN
COMM
MANUAL